Description
Emulates behavior of Haltech IO 12 box.
- 4x 0v – 5v Analog inputs
- 4x Digital Inputs (on – off state only)
- 4x Digital pulsed outputs
- Change from IO Box A or B by soldering across the solder bridge marked “AB”.
Compatible with the following ECUs
- Haltech – PS, Elite and Nexus
- Link G4+, G4X, G5
- MAXXECU
- ECU Master Pro, ADU and PMU
Pullup resistors can be added for the Analog inputs by soldering surface mounted resistors (included) across the relevant pads on the bottom of the board.
There are limitations with this mini board:
– 200mA limit for the outputs.
– No frequency drive for the outputs. State or PWM only. (490hz or 980hz)
– 0v-5v on the AVI only.
– Input protection for AVI, 12v tolerant. Still only reads 0-5v
-DPIs are state only (on or off), No Frequency measurements. Pull to ground.
Top View
Bottom View
Will come with an Arduino Nano with the code loaded on and tested.
Includes:
- 2x 4 position connectors
- 1x 5 position connector
- 1x 6 position connector
- 19x terminals
- 3D printed case with mounting hardware
- 4x SMD pullup resistors
Open Source Firmware
Code for this project is on our gitHub – https://github.com/ptmotorsport/IObox-emulator-haltech
Check it out! Learn something new and contribute!
Reviews
There are no reviews yet.