Description
Each extraction tool is designed to extract individual Deutsch pin and socket contacts from rear-release connectors (DTHD, HD30).
Tool Diagram
Using the Tool
1. From the rear of the connector, align the tool tip with the contact cavity of the contact to be removed. Place the wire of the contact over the tool wire entry slot and apply light pressure on the wire until it enters the wire entry slot.
2. Slide the tool along the wire and into the contact cavity until the tool tip engages the contact and
resistance is felt.
3. Gently pull the tool with the wire until the contact is removed. 
Caution:
Do not twist or insert the extraction tool at an angle; otherwise, damage to the cavity retention finger(s) will result.
Listing is for each tool, part numbers are as follows:
| 0411-240-2005 | Removal Tool Size 20 (Red) |
| 0411-291-1405 | Removal Tool Size 16 (Light Blue) |
| 0411-310-1605 | Removal Tool Size 12 (Orange) |
Reviews
There are no reviews yet.